Licensed & Insured, in Roseville and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Roseville
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (279) 529-5726 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Roseville and surrounding areas · On-site visits included · Free estimate within 24h
Roseville Metal Roofing is a team of local certified professionals based in Roseville. We respond quickly in Roseville and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (279) 529-5726⭐⭐⭐⭐⭐ 4.9/5 · 222 verified Google reviews
“We had an old metal barn out on our rural property that needed to come down, and honestly I figured it would be a nightmare. The Roseville Metal Roofing crew pulled the corrugated panels, hauled off the steel, and left the site cleaner than they found it. Took them two days for the whole structure. Grateful doesn't cover it.”
Commercial & Agricultural Metal Roofing
“The copper awning over our front entry had gone green and streaky and I was worried it was ruined. They cleaned it up, re-flashed the whole thing, and it looks better than the day we bought the house. Small job but they treated it like it mattered.”
Copper & Specialty Metal Roofing
“Our barn roof was rusted through in spots and I figured we'd have to tear the whole thing off. Instead they did a metal roof replacement with new ribbed panels and re-fastened everything along the eaves. Whole thing took three days with a four-man crew. It's solid again and I can finally stop worrying about the hay getting soaked.”
Metal Roof Replacement
“We went with standing seam on our house after years of shingle headaches. The crew of five knocked out the whole 2,400 square foot roof in under a week, and the dark bronze finish looks incredible. Neighbors have already asked for their number.”
Standing Seam Metal Roofing
“Had a leak near a vent pipe on our metal roof that two other guys couldn't figure out. Roseville Metal Roofing found it in about twenty minutes, resealed the flashing, and replaced a few stripped screws while they were up there. No more drip in the hallway ceiling. Relieved is an understatement.”
Metal Roof Repair
“We needed gutters that actually worked with our metal roof instead of the mismatched setup the previous owner left behind. They installed a proper seamless system along the back of the house and the dry landscaping in our yard finally stopped getting hammered every time it rains. Clean, quick, no mess left behind.”
Gutters for Metal Roofs
“Didn't want to deal with a full tear-off so we asked about a retrofit. They laid the new metal panels right over our old shingles on the 1,800 square foot ranch house and finished in four days. Saved us thousands and the house has been noticeably cooler this summer. Only gripe is the scheduling took a little longer than they first quoted.”
Metal Roof Over Shingles (Retrofit)
“We wanted the look of tile without the weight and cracking, so they set us up with metal shingles in a terracotta color. Honestly from the street you can't tell the difference, and the whole roof went on in about a week. Thrilled with how it turned out.”
Metal Shingle RoofingReal photos of our work in Roseville · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed fastener panel install | Starting at $8/sq ft | Corrugated or ribbed panels, underlayment and trim; price rises with pitch and tear-off. |
| Standing seam install | Starting at $14/sq ft | Concealed fasteners, raised seams and custom flashing; complexity and panel gauge drive cost. |
| Metal shingle or stone-coated steel | Starting at $12/sq ft | Stamped or textured panels with trim; roof shape and HOA color requirements affect price. |
| Complex or large-scale job | On estimate | Multiple valleys, skylights, chimneys or steep two-story access need an on-site look first. |
| Travel | Included | In Roseville and surrounding Placer County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (279) 529-5726, no obligation to book the job. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Snap-lock standing seam, standard home | Starting at $10/sq ft | Includes tear-off, underlayment and panels; roof complexity and panel length move the price most |
| Mechanically seamed standing seam | Starting at $13/sq ft | Includes on-site roll forming and seaming; long panel runs and steep access push it higher |
| Standing seam over existing shingles | On estimate | Needs an on-site look at deck condition, existing layer count and local code limits |
| Complex roof with valleys and skylights | On estimate | Cut-up hips, dormers and multiple penetrations require a measured takeoff before pricing |
| Travel | Included | In Roseville and surrounding Placer County areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (279) 529-5726, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Basic metal roof replacement | Starting at $9/sq ft | Includes tear-off, decking inspection, underlayment and standard panel install on an accessible single-story roof. |
| Standing seam replacement | Starting at $14/sq ft | Concealed-fastener panels with custom flashing, priced higher on steep pitches and complex roof geometry. |
| Tile tear-off and stone-coated steel | Starting at $16/sq ft | Concrete tile removal, disposal fees and granule-coated steel panels; multiple valleys and skylights raise the rate. |
| Complex or large-scale job | On estimate | Steep two-story roofs, historic district review, decking repairs and tight-lot access need an on-site look first. |
| Travel | Included | In Roseville and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (279) 529-5726, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Retrofit over existing single-layer shingles | Starting at $7/sq ft | Includes deck inspection, slip sheet, and metal installation over one sound shingle layer. |
| Retrofit with partial re-deck | Starting at $9/sq ft | Adds replacement of soft or delaminated sheathing before the metal goes down. |
| Batten and purlin retrofit | Starting at $10/sq ft | Adds horizontal battens for a drainage plane and ventilation gap over old shingles. |
| Complex or large-scale job | On estimate | Multiple valleys, dormers, two-story access, and chimney flashing need an on-site look. |
| Travel | Included | in Roseville and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (279) 529-5726, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor repair (fasteners, sealant, small flashing) | Starting at $450 | Covers a handful of failed fasteners, resealed penetration, or small flashing fix, with attic check included. |
| Panel replacement (one to three panels) | Starting at $850 | Includes profile and color matching, new fasteners, and sealant; pitch and height move the price. |
| Leak diagnosis and repair | Starting at $550 | Full roof and attic inspection to trace the leak, then repair at the actual source, not the stain. |
| Storm and wind damage repair | On estimate | Scope depends on how many panels lifted or were lost, and whether insurance documentation is needed. |
| Travel | Included | In Roseville and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (279) 529-5726, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Fastener and washer replacement | Starting at $450 | Includes leak tracing, replacement of failed screws with new EPDM washers, and a re-test. |
| Flashing, pipe boot or wall transition repair | Starting at $650 | Covers rebuilding the failed flashing detail with new metal and correct laps. |
| Seam and lap repair on standing seam | Starting at $750 | Re-crimping or re-sealing opened seams and end laps, priced by linear feet affected. |
| Panel and underlayment repair | On estimate | Requires on-site inspection to size panel removal, underlayment damage and access. |
| Emergency tarping during storm | Starting at $350 | Same-day temporary protection during heavy winter storms, credited toward the repair. |
| Estimate | Free | Response within 24 hours at (279) 529-5726, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Basic re-fastening (single slope, small roof) | Starting at $750 | Includes inspection, failed screw replacement, and new UV-resistant washers on a small single-story roof. |
| Full-roof washer and screw pass | Starting at $1,200 | Covers the whole roof, with oversized screws where holes are stripped; panel count moves the price. |
| Panel re-seat and re-fasten | Starting at $1,500 | Includes lifting, straightening, and re-fastening wind-lifted panels plus sealing laps and penetrations. |
| Deck repair plus re-fasten | On estimate | Rotted sheathing has to be replaced before re-fastening, so we price it after an on-site look. |
| Travel | Included | In Roseville and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (279) 529-5726, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof, simple single-story | Starting at $5.50/sq ft | Includes panels, underlayment, fasteners, and basic flashing on an accessible roof. |
| R-panel roof with tear-off | Starting at $7.25/sq ft | Adds removal and disposal of existing roofing plus decking inspection before install. |
| Shop, barn, or carport roof | Starting at $4.75/sq ft | Open framing and large flat runs lower labor, but height and access can raise it. |
| Complex or steep roof | On estimate | Steep pitch, multiple valleys, and tight access need an on-site look before pricing. |
| Travel | Included | Covered in Roseville and surrounding Placer County areas with no separate mileage fee. |
| Estimate | Free | Response within 24 hours at (279) 529-5726, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal shingle roof replacement | Starting at $9/sq ft | Includes tear-off of one layer, underlayment, flashing and standard metal shingle installation. |
| Metal shingle installation over existing deck | Starting at $8/sq ft | Includes deck inspection, underlayment and new shingles where tear-off is not required. |
| Metal shingle repair and re-fastening | Starting at $450 | Includes replacement of damaged shingles, resealing flashing and checking fastener lines. |
| Complex or large-scale job | On estimate | Steep pitches, multiple valleys, two-story access and custom profiles need an on-site look. |
| Travel | Included | In Roseville and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (279) 529-5726, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Tile-look stone-coated steel | Starting at $9/sq ft | Includes panels, high-temp underlayment, and standard flashing on a straightforward pitch and layout. |
| Shake-look stone-coated steel | Starting at $10/sq ft | Includes wider profile panels and trim, with cost rising on complex valleys, dormers, and steep pitches. |
| Full tear-off and replacement | On estimate | Needs an on-site look to price tear-off layers, sheathing repair, and disposal before we quote. |
| Retrofit over existing shingles | On estimate | Depends on existing layer count, deck condition, and code limits on recover, verified on site. |
| Travel | Included | In Roseville and surrounding cities, with no separate call-out or mileage fee added. |
| Estimate | Free | Response within 24 hours at (279) 529-5726, with no obligation to book the job. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper accent roofing | Starting at $20/sq ft | Includes fabrication and installation on porches and bay windows, with complexity driving the price up. |
| Full copper architectural roof | Starting at $28/sq ft | Covers full standing seam or flat seam copper with soldered details and underlayment included. |
| Zinc or aluminum specialty roof | Starting at $16/sq ft | Material cost is lower than copper, but access and roof complexity still move the number. |
| Custom fabrication for details | On estimate | Irregular valleys, dormers, and historic trim require an on-site look before pricing. |
| Travel | Included | In Roseville and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (279) 529-5726, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Reflective coating on sound residential metal roof | Starting at $2.50/sq ft | Includes pressure wash, spot prime and one reflective topcoat on a single-story roof with minor chalk. |
| Rust treatment and full coating system | Starting at $3.75/sq ft | Adds rust conversion, epoxy primer and fastener sealing for older corrugated or ribbed panels. |
| Stone-coated steel or metal shingle recoat | Starting at $4.25/sq ft | Higher coating volume and detail work around valleys, ridges and penetrations on textured profiles. |
| Commercial or agricultural metal roof coating | On estimate | Large square footage and access equipment require an on-site walk before we quote a firm number. |
| Screw replacement before coating | Quoted per fastener | Replacing rusted or backed-out screws prevents coating failure at every penetration point. |
| Estimate | Free | On-site inspection and written quote within 24 hours, no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Skylight flashing repair | Starting at $600 | Includes boot or curb seal repair on an accessible skylight; pitch and height raise the price. |
| Chimney counterflashing repair | Starting at $750 | Resets or rebuilds counterflashing at the masonry; chimney size and roof access move the number. |
| Valley or step flashing | Starting at $850 | Covers fabricated valley or step flashing on a standard roof; length and geometry affect the quote. |
| Full penetration rebuild | On estimate | Needed when rot or repeated failure requires removing and rebuilding the assembly on site. |
| Travel | Included | In Roseville and surrounding areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (279) 529-5726, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Ridge and eave closure replacement | Starting at $1,200 | Includes inspection, removal of worn closures, and installation of ember-rated UV-stable material on a typical single-story roof. |
| Wind-uplift clip and fastener reinforcement | Starting at $1,800 | Includes edge and corner clip upgrades plus fastener replacement on exposed-fastener panels, priced by roof size and access. |
| Reflective coating application | Starting at $2,400 | Includes surface prep and cool-roof coating on south- and west-facing metal panels, priced by square footage and pitch. |
| Multi-building or steep-pitch job | On estimate | Custom homes, barns, and steep roofs need an on-site look for safety setup, access, and material quantities before a number is given. |
| Travel | Included | in Roseville and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (279) 529-5726, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof and attic-side inspection with photo documentation, no obligation to book the repair. |
| Single panel or flashing repair | Starting at $350 | Includes panel match, new sealant and water test; price rises with roof pitch and access. |
| Fastener and washer replacement | Starting at $600 | Covers field re-fastening on one slope; total depends on roof size and panel count. |
| Multi-slope or structural damage | On estimate | Needs an on-site look because scope depends on underlayment condition and panel availability. |
| Travel | Included | In Roseville and surrounding Placer County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (279) 529-5726, written scope with photos, no obligation. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard residential inspection | Free estimate | Visual walk-through with photo report on panels, seams, fasteners and flashing; price moves with roof size and pitch. |
| Pre-purchase or insurance report | Starting at $250 | Written condition report with remaining service life call; cost rises with penetrations, roof height and documentation detail. |
| Exposed-fastener and seam audit | Starting at $300 | Hand-check and torque test of fasteners plus seam and clip inspection; price depends on panel count and access. |
| Complex or large-scale roof | On estimate | Multi-story, steep, or commercial and agricultural roofs need an on-site look before a number is given. |
| Travel | Included | In Roseville and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (279) 529-5726, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless aluminum K-style gutter | Starting at $9/linear ft | Formed on site with hangers set for your panel profile; run length and downspout count move the price. |
| Half-round steel or aluminum gutter | Starting at $14/linear ft | Period-correct profile with hidden hangers for older Roseville homes; fascia condition and wall height affect cost. |
| High-capacity box gutter | Starting at $22/linear ft | Oversized trough for long standing seam runs; roof pitch and access drive the final figure. |
| Guards, strainers, and downspout extensions | Starting at $6/linear ft | Micro-mesh or screen guard plus outlet strainers; tree load and outlet count change the total. |
| Fascia repair before hanging | On estimate | Rot and soft rafter tails need an on-site look before we quote repair and re-hang. |
| Estimate | Free | Response within 24h at (279) 529-5726, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Repair or re-fastening visit | Free estimate | Includes roof walk, photos, and a written scope for screws, washers, and flashing repairs. |
| Exposed-fastener panel roof | Starting at $4.50 per sq ft installed | Ribbed through-fastened panels with washered screws; price moves with roof size, pitch, and flashing count. |
| Standing seam commercial roof | Starting at $9 per sq ft installed | Concealed-fastener panels with raised seams; cost rises with roof height, curbs, and insulation. |
| Insulated barn or shop system | On estimate | Needs an on-site look at purlin spacing, condensation control, and ventilation before pricing. |
| Travel | Included | in Roseville and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (279) 529-5726, no obligation to book. |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Roseville need a crew that understands the local building stock, not a call center three states away. Roseville Metal Roofing works through a network of licensed, insured local contractors who handle metal roof installation, replacement, re-roofs, and repairs on homes from Old Roseville to the foothill edge. That means steep mountain pitches, heavy tree cover, high-elevation exposure, and a large stock of aging screw-down roofs whose fasteners are due for service.
We serve Roseville, Rocklin, Loomis, Granite Bay, Folsom, and the surrounding Placer County communities. Whether your home sits under valley oaks near downtown or backs up to dry golden grass in the foothills, our crews know how heat, wind, and winter storms treat a metal roof here. To talk through your roof, request a free estimate and we will give you a straight read on what your roof actually needs.
Most metal roof leaks we see in Roseville trace back to a short list of causes, and the number one cause on 15 to 30 year old exposed-fastener roofs is fasteners backing out as their EPDM sealing washers dry, shrink, and crack. Once that washer fails, water works past the screw head. Seam separation from thermal movement is next: panels expand and contract through hot summers and cold winters, and seams that were tight can open. Failed pipe boots and flashing at chimneys, skylights, and valleys let water in at the transitions. Wind-lifted panels after a winter storm, and punctures from fallen oak limbs, round out the usual calls. Our metal roof repair crew diagnoses each one on site.
Ignoring a small leak is expensive. Water tracks along purlins and decking far from the entry point, so by the time you see a stain on the ceiling, sheathing and insulation may already be wet and rotting. That is why we chase the source, not the stain. For urgent leaks, call (279) 529-5726 and we will get a crew out to stop the water and document the damage.
The honest call between repair and replacement is not always replacement. On many older screw-down roofs, a full screw replacement and re-fastening with new sealing washers restores a watertight roof for a fraction of replacement cost, especially when the panels and finish are still sound. We will tell you plainly when a repair is the right money and when it is throwing good money after bad. Reach out through our free estimate page and we will walk your roof before we recommend anything.
We install the full range of metal systems: standing seam with concealed clips and no exposed fasteners, corrugated and ribbed panels as the economical workhorse for cabins, barns, and workshops, metal shingles, stone-coated steel, and copper and specialty metal for accents and custom homes. The honest comparison is simple: standing seam costs more up front and has no exposed screws to maintain, while screw-down costs less and needs its fasteners serviced over its life.
We match the system to the home, not the other way around. A retrofit over existing shingles is a legitimate option when the deck is sound and code allows it, and a full tear-off is the right call when the deck is not. Either way, we tell you which one your roof actually supports.
Metal roof installs in Roseville are typically quoted per square foot, while repairs are often flat-rate. Price depends on the panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access. We frame every figure as a typical range because final pricing depends on the roof and site conditions. Some carriers may offer premium discounts for metal or impact-rated roofs, but that is between you and your insurer.
For a clearer picture of how systems compare, see our pricing page, then request a free estimate or free roof inspection so we can price your actual roof rather than a ballpark.
After a storm, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise a claim will be approved. What we can do is document the damage accurately and let your carrier decide.
On permits: in most jurisdictions a permit is commonly required for a full replacement or re-roof, but requirements, fees, and inspection thresholds vary by city. Historic district or HOA design review can also affect panel profile and color choices. We treat permitting as informational only, never advice. Requirements vary, so always verify with the Roseville building or planning department before starting your project. To schedule an inspection, contact us.
Ready to get started? Roseville Metal Roofing serves in Roseville and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Roseville · Response within 24h · No commitment · ☎ (279) 529-5726
Your Free Quote Request