Serving the Roseville area  ·  (279) 529-5726  ·  Open Mon-Sun 7am-7pm
📞 (279) 529-5726 Free Quote

Metal Roofing in Granite Bay, CA (95746) · Local Professionals

Roseville Metal Roofing · Fast response in Granite Bay and the Roseville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+222Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Granite Bay is where the flat valley gives way to oak-studded hills, and the homes here show it: large custom builds on acre-plus lots, many with metal shops or barns out back, tucked between Folsom Lake and the Sierra foothills. If you live off Douglas Boulevard or near Granite Bay High School, you already know the look: stucco and stone facades, tile or composition roofs, and long driveways that curve through the oaks.

Homeowners in 95746 call Roseville Metal Roofing because we understand the specific demands of this area. From the ember exposure that comes with foothill living to the intense summer sun that bakes roofs year after year, we have seen what works here and what does not. We are based in Roseville, just down the road, and we know Granite Bay's housing stock and terrain firsthand.

Metal Roofing in Granite Bay (95746)

Granite Bay properties come with their own set of challenges. The terrain is rolling to steep, with clay and hardpan soils that shift with the seasons, and many lots are heavily wooded with valley oaks and blue oaks. That means roof access can be tricky, and drainage matters more than most homeowners realize. We often find gutters clogged with oak leaves and debris, leading to water backing up under shingles or panels. The large custom homes here frequently have complex rooflines with multiple valleys and dormers, which require careful flashing and seam work. And because we are at the edge of the wildland-urban interface, ember resistance is a real concern. That is why we recommend standing seam metal roofing with hidden fasteners and ember-resistant underlayments for many Granite Bay homes. We also install copper and specialty metal roofs for those who want a distinctive look that holds up to the foothill climate.

Our team has worked on everything from ranch-style homes near Folsom Lake to newer custom builds off Auburn Folsom Road. We know the local building department requirements and can help you navigate the permit process.

Our services in Granite Bay

How a Job Works in Granite Bay

Step 1: It starts with a call to (279) 529-5726 or a request through our website. We schedule a free on-site assessment at your Granite Bay property, where we inspect your current roof, check for leaks, loose fasteners, or storm damage, and discuss your options. We will provide a written estimate and answer any questions you have about materials, timelines, and permits.

Step 2: Once you approve the estimate, we handle the permitting and scheduling. For many Granite Bay homes, that means coordinating with Placer County or the city, and if you are in an HOA, we can provide the documentation needed for architectural review. On the job site, our crew takes care to protect your landscaping and keep access clear. We work efficiently, especially on steep or wooded lots where staging requires extra planning.

Step 3: After the work is complete, we do a thorough cleanup, including magnet sweeps for nails and debris removal. We walk the roof with you to review the finished product and make sure you are satisfied. We leave your property clean and your roof ready for the seasons ahead.

Pricing for metal roofing in Granite Bay depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are considering a retrofit over existing shingles, that starts at $7 per square foot. For repairs, common fixes like leak repair start at $450, and screw replacement or re-fastening starts at $750. Flashing and chimney repair starts at $600. These are starting prices, and we provide a detailed, no-obligation estimate after inspecting your roof. Call (279) 529-5726 to schedule your free estimate.

My Granite Bay home is surrounded by oak trees. Will metal roofing handle the debris and shade?
Yes, metal roofing is actually a great choice for wooded properties. The smooth surface sheds leaves and debris more easily than asphalt shingles, and it resists the moss and algae that can grow in shaded areas. However, we recommend regular gutter cleaning and trimming back overhanging branches to prevent damage. We can also install leaf guards to reduce maintenance.
A winter storm just lifted some panels on my roof in Granite Bay. Can you help quickly?
Absolutely. We offer emergency storm and wind damage repair, and we can usually get to Granite Bay properties within a day or two of your call. We will secure the roof to prevent further water intrusion and provide a full estimate for permanent repairs. Call us at (279) 529-5726 to schedule an inspection.
What does a typical metal roof replacement cost for a 2,500-square-foot home in Granite Bay?
For a home that size, a standard metal roof replacement might range from $18,000 to $30,000, depending on the material and roof complexity. Standing seam or stone-coated steel will be on the higher end. We provide free estimates so you can get an accurate number for your specific roof.
Do I need a permit to replace my roof in Granite Bay, and can you help with that?
Yes, roofing permits are generally required for replacements and re-roofs in Granite Bay. The exact requirements and fees vary, so we always verify with the local building department. We handle the permit application process for you as part of our service.
My HOA has strict rules about roof colors. Can you help me get approval?
We work with HOAs regularly and can provide material samples, color chips, and specification sheets to submit for architectural review. We will coordinate with your HOA to ensure the chosen metal roofing meets their guidelines.
Are you fully insured for roofing work in Granite Bay?
Yes, Roseville Metal Roofing is fully insured, carrying both general liability and workers' compensation coverage.
What maintenance does a metal roof need in Granite Bay's climate?
In our area, we recommend an annual inspection to check for loose fasteners, debris buildup, and sealant wear. Because of the intense UV and occasional storms, keeping gutters clear and trimming trees away from the roof will extend its life. We offer maintenance plans and inspections to keep your roof in top shape.
Why choose us?

Trusted professionals in Roseville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Roseville

All your work handled by qualified professionals in Roseville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

222+ Verified Client Reviews in Roseville

⭐⭐⭐⭐⭐ 4.9/5 · 222 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Roseville · Response within 24h · No commitment · ☎ (279) 529-5726

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Roseville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm