Serving the Roseville area  ·  (279) 529-5726  ·  Open Mon-Sun 7am-7pm
📞 (279) 529-5726 Free Quote

Metal Roofing in Antelope, CA (95843) · Local Professionals

Roseville Metal Roofing · Fast response in Antelope and the Roseville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+222Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Antelope is a tight-knit Sacramento Valley community where most of the housing went up in the 1980s and 1990s, and those original composition roofs are now well past their prime. If you live off Elverta Road or near Antelope High School, you have probably noticed neighbors replacing worn shingles with metal, especially after another summer of triple-digit heat and gusty delta breezes.

Homeowners in ZIP 95843 call Roseville Metal Roofing because we understand this specific housing stock. The low-slope and moderate-pitch roofs on these tract homes are perfect candidates for metal shingle roofing or a reflective metal roof coating that drops attic temperatures and stops the cycle of patch-and-replace. We are based just down the road in Roseville, so we know the afternoon winds that whip across the open fields west of Highway 65 and the oak litter that clogs valleys and gutters every fall.

Metal Roofing in Antelope (95843)

Antelope sits on flat valley ground with heavy clay and hardpan soils, which means drainage and proper fastening matter more than most homeowners realize. The 1980s and 1990s tract homes here typically have simple gable and hip roofs with composition shingles, often original, and many are now showing granule loss, lifted tabs, and fastener back-out after decades of intense UV and thermal cycling. Lots are moderately sized with driveways that can get tight when we stage materials, and many backyards open to neighboring rooflines, so we plan panel and bundle placement carefully to avoid crossing property lines or blocking access. The dry summers and winter atmospheric river storms create a one-two punch: UV bakes the shingles all summer, then wind-driven rain finds every failed flashing and exposed nail. Metal shingle roofing is a natural fit for these homes because it handles the heat, resists wind uplift, and looks appropriate for the neighborhood. For homeowners not ready for a full replacement, metal roof coating and painting can extend the life of an existing roof at a fraction of the cost, and we often recommend it for the older single-story ranches near Antelope Community Park.

Our team has worked throughout Antelope and the surrounding Roseville area, from the older streets near Antelope Road to the newer developments off Watt Avenue. We know which jurisdictions require permits, how to document storm damage for insurance claims, and how to schedule work around the hot summer months when roofers need to start early and hydrate constantly.

Our services in Antelope

How a Job Works in Antelope

Step 1: You call (279) 529-5726 or request a free estimate online. We schedule an on-site assessment at your Antelope property, usually within a few days. We inspect the roof, attic if accessible, flashing, valleys, and fasteners, and we take photos so you can see exactly what we see. You get a written scope and a clear price before any work begins.

Step 2: Once you approve the estimate, we pull the required permit through the local building department and coordinate any HOA design review if your neighborhood has one. On installation day, our crew arrives early to beat the afternoon heat, protects your landscaping with tarps, and stages materials in your driveway or on the roof according to the access plan we set during the estimate. For tight lots or steep pitches, we use fall protection and careful panel handling. Most residential metal roof installations in Antelope take two to five days depending on size and complexity.

Step 3: We clean up every day, and at the end of the job we do a magnet sweep for nails and a final walkthrough with you. We show you the completed work, explain any maintenance items, and make sure you are satisfied before we leave. Your property is left clean and your new roof is ready for the next storm season.

Pricing for metal roofing in Antelope depends on the size and pitch of your roof, the material you choose, the condition of the existing roof, and access. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you want to go over existing shingles, metal roof over shingles (retrofit) starts at $7 per square foot, which can save on tear-off and disposal costs. Metal shingle roofing and stone-coated steel roofing both start at $9 per square foot, and corrugated or ribbed panel roofing starts at $5.50 per square foot. For smaller jobs, metal roof repair and leak repair start at $450, screw replacement and re-fastening starts at $750, and flashing, chimney, or skylight repair starts at $600. Metal roof coating and painting starts at $2.50 per square foot and is a popular option for the 1980s and 1990s tract homes here. We give free estimates and free inspections for storm or wind damage, so call (279) 529-5726 to get a real number for your Antelope home.

My Antelope home was built in the late 1980s and still has the original composition roof. Is metal shingle roofing a good fit for this housing stock?
Yes, it often is. The 1980s and 1990s tract homes in Antelope typically have simple roof shapes with moderate pitches and standard flashing details, which makes them straightforward candidates for metal shingle roofing. Metal shingles handle the intense UV and summer heat better than asphalt, resist wind uplift from delta breezes, and come in profiles and colors that suit the neighborhood. We will inspect your roof and attic to confirm the decking is sound and that any necessary repairs are done before installation.
A winter storm just peeled back some panels on my roof near Elverta Road. How fast can you respond?
We prioritize active leaks and storm damage. Call (279) 529-5726 and we will schedule an emergency inspection, usually within 24 to 48 hours depending on weather and demand. We can tarp or secure the area to prevent further water intrusion, document the damage with photos for your insurance claim, and provide a written repair estimate. We never promise insurance coverage, but we do provide the documentation your adjuster needs.
What does a typical metal roof coating or painting job cost for a single-story ranch in Antelope?
Metal roof coating and painting starts at $2.50 per square foot, so a typical 1,500 to 2,000 square foot single-story roof in Antelope often falls in the $3,750 to $5,000 range before any necessary repairs. The final price depends on the roof's condition, the number of penetrations and valleys, and whether any rust or loose fasteners need attention first. We include surface preparation and fastener checks in our estimates so there are no surprises.
Do I need a permit to replace my roof in Antelope, and who handles it?
Roofing permits are commonly required for a full replacement or re-roof in Antelope, and the thresholds, fees, and inspection requirements are set by the local building department. We verify the current rules with the jurisdiction before we start and pull the permit on your behalf as part of the job. If your home is in an HOA, we also help coordinate any design review for panel profile and color. Rules can change, so we always confirm with the building department rather than assume.
My neighbor's oak tree drops limbs on my roof, and I want to install a metal roof. What about the property line and HOA approval?
Property line rules in California generally allow you to trim branches that overhang your property, but we recommend confirming with your neighbor and, if needed, a local arborist before cutting anything significant. For the roof itself, if your Antelope neighborhood has an HOA, we can provide product specifications and color samples for the design review committee. We do not handle neighbor disputes, but we can position the roof and flashing so that water and debris flow away from the property line.
Are you fully insured for work on my Antelope property?
Yes. Roseville Metal Roofing is fully insured, carrying both general liability and workers' compensation coverage. We are happy to provide a certificate of insurance before work begins so you can verify coverage with your own agent. This protects you and your property throughout the project.
What maintenance should I do on a metal roof in Antelope to prepare for summer and winter?
Twice a year, ideally in spring and late fall, clear leaves and debris from valleys, gutters, and around skylights and chimneys. Check that no fasteners have backed out after winter winds, and look for any signs of sealant wear at flashings. In Antelope, the dry summer UV can degrade sealants faster than in cooler climates, so an annual inspection is smart. We offer free estimates for inspections and can re-fasten or replace screws starting at $750.
Why choose us?

Trusted professionals in Roseville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Roseville

All your work handled by qualified professionals in Roseville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

222+ Verified Client Reviews in Roseville

⭐⭐⭐⭐⭐ 4.9/5 · 222 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Roseville · Response within 24h · No commitment · ☎ (279) 529-5726

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Roseville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm