Serving the Roseville area  ·  (279) 529-5726  ·  Open Mon-Sun 7am-7pm
📞 (279) 529-5726 Free Quote

Metal Roofing in El Dorado Hills, CA (95762) · Local Professionals

Roseville Metal Roofing · Fast response in El Dorado Hills and the Roseville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+222Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

El Dorado Hills climbs out of the Sacramento Valley into oak-studded foothills, where hilltop custom homes and newer stucco subdivisions like Serrano and Blackstone sit on sloped lots with long views and hot, exposed roofs. The housing stock here runs from 1990s two-story stucco with concrete tile to brand-new custom builds, and the sun and winter storms hit both the same way.

Homeowners in 95762 call Roseville Metal Roofing because we understand how metal performs in this terrain: ember-resistant stone-coated steel for fire-season peace of mind, standing seam for clean lines on custom homes, and retrofit over shingles when the budget calls for it. We are based in Roseville and serve El Dorado Hills regularly, from the Serrano HOA to the rural edges off Salmon Falls Road.

Metal Roofing in El Dorado Hills (95762)

El Dorado Hills properties bring their own set of challenges. The ground is often clay and hardpan, so drainage around the foundation matters, and sloped lots mean roof access can require staging on grade or careful ladder placement. Many homes sit on hillsides with tight side yards, and some custom builds have complex rooflines with multiple valleys and dormers that demand precise flashing. The long dry summers with intense UV bake composition shingles and dry out sealants, while winter atmospheric-river storms drive rain sideways and test every fastener and seam. Oak limbs overhang roofs, and wildfire embers are a real concern on the ridge tops.

Our team has worked on everything from single-story ranches near the El Dorado Hills Town Center to large custom homes in Serrano and the gated communities off Green Valley Road. We know how to coordinate with HOAs and the El Dorado County building department, and we understand the wind exposure on hilltop lots. Whether it is standing seam on a modern farmhouse or stone-coated steel on a Mediterranean-style stucco, we match the metal system to the house and the site.

Our services in El Dorado Hills

How a Job Works in El Dorado Hills

Step 1: Call us at (279) 529-5726 or request a free estimate online. We will schedule an on-site assessment at your El Dorado Hills property, inspect the existing roof, take measurements, and discuss your options. We will also note any HOA or permit requirements specific to your neighborhood.

Step 2: Once you approve the scope and price, we handle the permitting with El Dorado County and order materials. On the work date, our crew arrives with the necessary equipment, protects your landscaping, and removes the old roofing if needed. For tight hillside lots, we plan staging carefully to avoid blocking driveways or damaging slopes. We keep you informed at every stage.

Step 3: After installation, we do a thorough cleanup, including magnet sweeps for nails, and walk the roof with you to review the finished job. We do not consider the job done until you are satisfied. We leave your property clean and your new metal roof ready for decades of service.

Pricing for metal roofing in El Dorado Hills depends on the system, roof size, complexity, and access. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and retrofit over shingles at $7. Stone-coated steel and metal shingle roofing both start at $9 per square foot, while corrugated panel roofing starts at $5.50. Repairs start at $450, screw replacement at $750, and flashing or chimney repair at $600. Snow guards start at $1,200, and gutters for metal roofs at $9 per linear foot. For an accurate quote on your El Dorado Hills home, call (279) 529-5726. We provide free estimates and honest advice.

My Serrano home has a concrete tile roof that is starting to fail. Can you install metal over it, and will the HOA approve?
Yes, we can often install a metal roof over existing concrete tile after a structural inspection, but the HOA in Serrano and other El Dorado Hills communities may have design guidelines. We help you prepare the submittal with color samples and product specs, and we coordinate with the architectural committee. We will verify whether your current roof layers allow a retrofit under code.
A winter storm just blew off some panels on my roof off Green Valley Road. How fast can you respond?
We prioritize storm damage calls in El Dorado Hills. Call (279) 529-5726 and we will schedule an inspection, usually within 24 to 48 hours. We can tarp or secure the area to prevent further damage and provide a written estimate for repairs. Our team is experienced with wind-lifted panels and seam separation.
What does a typical metal roof replacement cost for a 2,500 square foot house in El Dorado Hills?
For a standard 2,500 square foot home with a moderate roof pitch, a metal roof replacement typically ranges from $18,000 to $30,000 depending on the metal type, roof complexity, and whether tear-off is needed. Standing seam and stone-coated steel are at the higher end. We provide a detailed, no-obligation estimate after inspecting your property.
Do I need a permit from El Dorado County to replace my roof in 95762?
Yes, a building permit is generally required for a full roof replacement in El Dorado Hills. The exact requirements and fees are set by El Dorado County, and we handle the permitting process for you. We will verify current rules with the county building department before starting work.
My neighbor's oak tree hangs over my roof. Who is responsible for trimming it, and can you help with the roof damage?
In California, you generally have the right to trim branches that overhang your property, but it is best to talk with your neighbor first. We can repair any damage caused by limbs, such as punctures or scraped panels, and we can recommend trimming before installation to prevent future issues.
Are you fully insured for work at my El Dorado Hills home?
Yes, Roseville Metal Roofing is fully insured, carrying both general liability and workers' compensation coverage. You can have confidence that your property and our crew are protected.
What maintenance does a metal roof need in El Dorado Hills' climate?
In our hot, dry summers and stormy winters, we recommend an annual inspection to check fasteners, seals, and flashing. Gutters should be cleaned regularly, especially if you have overhanging oaks. Snow guards are useful on higher-elevation homes to prevent ice slides. We offer maintenance plans and can address small issues before they become leaks.
Why choose us?

Trusted professionals in Roseville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Roseville

All your work handled by qualified professionals in Roseville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

222+ Verified Client Reviews in Roseville

⭐⭐⭐⭐⭐ 4.9/5 · 222 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Roseville · Response within 24h · No commitment · ☎ (279) 529-5726

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Roseville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm