Serving the Roseville area  ·  (279) 529-5726  ·  Open Mon-Sun 7am-7pm
📞 (279) 529-5726 Free Quote

Metal Roofing in Woodland, CA (95776) · Local Professionals

Roseville Metal Roofing · Fast response in Woodland and the Roseville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+222Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Woodland is a town of tree-lined streets, historic Victorians, and working farm ground, all sitting right where the Sacramento Valley starts to tilt toward the foothills. From the old homes near downtown and the Yolo County Courthouse to the newer subdivisions off County Road 102, the housing stock here ranges from 1890s farmhouses to modern stucco two-stories, and the roofs take a beating from summer UV, winter atmospheric rivers, and the occasional oak limb.

We are Roseville Metal Roofing, based just up the road in Roseville, and we serve Woodland (95776) and the surrounding Yolo County area. Whether you own a Victorian near First Street, a ranch home off West Main, or a commercial ag building out on Road 98, we bring the same approach: honest assessments, metal roofing systems that fit the building, and cleanup that leaves your property better than we found it.

Metal Roofing in Woodland (95776)

Woodland has a mix of roof challenges you do not see everywhere. The historic Victorians and Craftsman bungalows near downtown often have steep pitches, complex hips and valleys, and decorative trim that require careful flashing and panel layout. The mid-century ranch homes and farmhouses on larger lots often have low-slope sections, wide eaves, and mature valley oaks hanging over the roof, which means leaf debris, limb damage, and shaded areas that stay damp longer. Out toward the agricultural edges, metal shops, barns, and packing sheds need roofing that handles dust, heat, and occasional equipment impact. The clay and hardpan soils here also mean proper drainage away from the foundation matters, and our gutter and flashing work is sized for the heavy winter rains that come through the Sacramento Valley.

Our team has worked on homes and commercial buildings across the Roseville area and into Woodland, from standing seam installations on newer homes to copper and specialty metal work on historic properties. We understand how the afternoon delta breezes and winter storm winds can stress fasteners and seams, and we build accordingly.

Our services in Woodland

How a Job Works in Woodland

Step 1: You call us at (279) 529-5726 or request a free estimate online. We schedule an on-site assessment at your Woodland property, whether it is a home near the Woodland Opera House or a commercial building off East Street. We inspect the roof, discuss your goals, and provide a written estimate with clear pricing and options.

Step 2: Once you approve, we handle the work. For many Woodland jobs, that means coordinating with the city building department for permits, especially on full replacements or re-roofs. On older homes with tight lot access or historic district considerations, we plan deliveries and staging carefully. If your property is in an HOA, we can provide documentation for design review. Our crew protects landscaping and works efficiently to minimize disruption.

Step 3: After installation or repair, we clean the site thoroughly, haul away old materials, and walk the property with you to confirm everything is done right. We do not leave until you are satisfied and your property is clean.

Pricing for metal roofing in Woodland depends on the scope and material. As a ballpark, metal roof installation starts around $8 per square foot, standing seam from $10, metal roof replacement from $9, and a retrofit over existing shingles from $7. Repair jobs like leak fixes start around $450, screw replacement and re-fastening from $750, and flashing or chimney repair from $600. Coating and painting starts at $2.50 per square foot, and gutters for metal roofs run about $9 per linear foot. Commercial and agricultural projects are quoted individually. Key cost factors include roof size and pitch, accessibility, the condition of the existing roof, material choice, and urgency. Call us at (279) 529-5726 for a free, no-pressure estimate tailored to your Woodland property.

My 1920s bungalow near downtown Woodland has a low-pitched roof and original details. Can you install metal without losing the historic look?
Yes. For older homes in Woodland's historic core, we often recommend metal shingle or stone-coated steel profiles that mimic traditional materials while giving you the durability of metal. We pay close attention to flashing, trim, and panel layout to respect the original architecture. If your home is in a historic district, we can help you understand what the city's design review process may require.
A winter storm just lifted some panels on my roof off West Main. How fast can you respond?
We prioritize storm damage calls in Woodland and the surrounding area. Call us at (279) 529-5726, and we will schedule an inspection as quickly as possible, often within a day or two depending on demand. We can secure the roof temporarily if needed and provide a written repair estimate.
What does a typical metal roof replacement cost for a 1,500-square-foot ranch home in Woodland?
For a home that size, a basic corrugated or ribbed panel roof might start around $5.50 per square foot, while standing seam could be closer to $10 per square foot. A full replacement with removal of old shingles typically falls in the $9 to $12 per square foot range depending on pitch, access, and material. We provide a detailed estimate after inspecting your roof.
Do I need a permit to replace my roof in Woodland, and how long does it take?
Yes, the City of Woodland typically requires a permit for a full roof replacement or re-roof. Requirements and fees vary, so we always confirm with the city building department before starting. Permit timelines can range from a few days to a couple of weeks. We handle the paperwork and inspections as part of our service.
My neighbor and I share a property line, and I want to install a metal roof that might overhang slightly. What should I know?
Property line and overhang rules in Woodland are governed by local setback ordinances, and it is always best to check with the city planning department before assuming anything. If you are in an HOA, design review may also apply. We can help you understand the typical requirements and coordinate with your neighbor if needed, but final approval rests with the city.
Are you fully insured for roofing work at my Woodland home?
Yes. We carry general liability insurance and workers' compensation coverage. We are happy to provide proof of insurance before any work begins so you can feel confident your property and our crew are protected.
What maintenance does a metal roof need in Woodland's climate?
Metal roofs are low maintenance, but in Woodland's hot, dry summers and wet winters, we recommend an annual inspection to check fasteners, seals, and flashing. Keeping oak leaves and debris off the roof and out of gutters is important, especially if you have overhanging trees. A coating every 10 to 15 years can extend the life of painted panels. We offer inspection and maintenance plans.
Why choose us?

Trusted professionals in Roseville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Roseville

All your work handled by qualified professionals in Roseville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

222+ Verified Client Reviews in Roseville

⭐⭐⭐⭐⭐ 4.9/5 · 222 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Roseville · Response within 24h · No commitment · ☎ (279) 529-5726

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Roseville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm