Serving the Roseville area  ·  (279) 529-5726  ·  Open Mon-Sun 7am-7pm
📞 (279) 529-5726 Free Quote

Metal Roofing in Folsom, CA (95630) · Local Professionals

Roseville Metal Roofing · Fast response in Folsom and the Roseville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+222Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Folsom's mix of Gold Rush era cottages near Sutter Street and newer hillside homes off East Bidwell Street means no two roofs are the same. From the low pitched porches of the historic district to the steep gables above Folsom Lake, the housing stock here spans more than a century, and each era brings its own roofing challenges.

That's why homeowners in Folsom (95630) call Roseville Metal Roofing. We understand how intense summer UV, winter atmospheric river storms, and drifting wildfire embers from the foothills affect metal roofs along the American River corridor. Whether you're near Folsom City Lions Park or up in the hills by Empire Ranch, we bring the same straightforward approach and fully insured crew to every job.

Metal Roofing in Folsom (95630)

Folsom sits where the flat Sacramento Valley meets the rolling oak studded foothills, and that transition creates real roofing challenges. In the historic district, you'll find 1910s to 1940s cottages with low pitched roofs and tight lot lines, often with mature valley oaks hanging over the eaves. Newer hillside neighborhoods like Folsom Heights and the areas around Briggs Ranch have steeper grades, wider homes, and concrete tile or composition roofs that are due for replacement. The ground here is clay and hardpan with seasonal creeks, so proper flashing and drainage are critical to prevent water from backing up under panels. We also see plenty of homes with wide eaves and stucco walls, which need careful detailing to avoid moisture intrusion behind the metal.

Our team has worked throughout Folsom and the surrounding Roseville area, from the flats near Folsom Premium Outlets to the elevated lots with views of the lake. We know how to handle tight access, steep driveways, and the permit requirements that come with older homes or HOA design review. Whether it's a standing seam roof on a custom home or a retrofit over shingles on a 1970s ranch, we've done it here.

Our services in Folsom

How a Job Works in Folsom

Step 1: It starts with a free on-site assessment. We'll walk your roof, check the decking, flashing, and existing layers, and talk through your options. You'll get a written estimate with clear pricing, no pressure.

Step 2: Once you approve, we handle the permit paperwork with the City of Folsom and coordinate any HOA approvals if needed. On install day, our crew protects your landscaping, sets up safe access (especially on steep hillside lots), and gets to work. For replacements, we tear off the old roof, inspect and repair the deck, then install your new metal roof with proper underlayment and flashing. We keep the site organized and clean as we go.

Step 3: After the work is done, we do a full cleanup, including magnet sweeps for nails, and walk the project with you. We don't leave until you're satisfied and understand how to care for your new roof.

Pricing for metal roofing in Folsom depends on the size and complexity of your roof, access, and the material you choose. As a ballpark, metal roof installation starts around $8 per square foot, standing seam from $10, metal roof replacement from $9, and a retrofit over existing shingles from $7. Smaller repairs like leak fixes start at $450, and screw replacement or re-fastening starts at $750. For a typical single story ranch in Folsom, a full replacement often lands in the low five figures, while larger hillside homes with complex rooflines will be higher. We always provide a free estimate, so call (279) 529-5726 to get exact numbers for your property.

My historic cottage near Sutter Street has a low pitched roof and oak limbs overhead. Can metal roofing work on that kind of home?
Yes, and it's a common request here. Low pitched roofs can be tricky, but we use standing seam or corrugated panels with proper underlayment and flashing to handle the slope. We also trim back overhanging oak limbs and install debris guards to keep leaves and acorns from collecting. The key is matching the panel profile to the historic look while improving durability.
A winter storm just peeled back some panels on my roof off East Bidwell Street. How fast can you respond?
We prioritize storm damage calls in Folsom. Call us at (279) 529-5726 and we'll schedule an inspection as soon as possible, often within 24 to 48 hours. We can tarp or secure the area to prevent further water damage, then provide a repair estimate. We also document damage for insurance claims if needed.
What does a metal roof replacement cost for a typical 1970s ranch home in Folsom?
For a single story ranch around 1,800 to 2,200 square feet, most replacements fall between $16,000 and $26,000 depending on the panel type, roof complexity, and whether we tear off existing layers. Retrofits over shingles can save a bit. We give you a detailed breakdown after a free inspection, so you know exactly what you're paying for.
Do I need a permit to replace my roof in Folsom, and does the historic district have extra rules?
Yes, the City of Folsom requires permits for roof replacements and some repairs. In the historic district, design review may be required for visible changes, including panel profile and color. We handle the permit application and can guide you through historic review if your home is in that zone. Rules can change, so we always confirm with the city before starting.
My HOA in Folsom has design rules. Can you help with approval for a metal roof?
We can. Many HOAs in Folsom require approval for roof material and color. We'll provide product samples, specifications, and color chips to submit with your application, and we can attend meetings if needed. We'll also make sure the installation meets any HOA conditions so there are no surprises later.
Are you fully insured for work at my Folsom property?
Yes, we carry general liability insurance and workers' compensation coverage. This protects you and your property throughout the project.
What maintenance does a metal roof need in Folsom's climate?
Metal roofs are low maintenance, but in Folsom you should check fasteners and seals annually, especially after winter storms. Remove debris from valleys and gutters, and inspect for loose panels after high winds. We offer inspection and maintenance plans to keep your roof in good shape and catch small issues before they become leaks.
Why choose us?

Trusted professionals in Roseville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Roseville

All your work handled by qualified professionals in Roseville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

222+ Verified Client Reviews in Roseville

⭐⭐⭐⭐⭐ 4.9/5 · 222 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Roseville · Response within 24h · No commitment · ☎ (279) 529-5726

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Roseville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm