Serving the Roseville area  ·  (279) 529-5726  ·  Open Mon-Sun 7am-7pm
📞 (279) 529-5726 Free Quote

Metal Roofing in Roseville, CA (95678) · Local Professionals

Roseville Metal Roofing · Fast response in Roseville and the Roseville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+222Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Roseville's mix of railroad-era bungalows near downtown, 1950s ranches along the Foothill Boulevard corridor, and newer stucco homes in Woodcreek Oaks and Fiddyment Ranch all take a beating from valley sun and foothill embers. If your roof is showing its age, we install, repair, and replace metal roofing built for this exact climate.

Homeowners in 95678 call Roseville Metal Roofing because we know the difference between a low-pitch Craftsman near Old Roseville and a two-story stucco in Westpark. We also understand how oak limbs and delta breezes affect roofs here, and we bring that local knowledge to every free estimate.

Metal Roofing in Roseville (95678)

Roseville sits where the flat valley floor meets the rolling oak-grass foothills, and that transition creates real roofing challenges. Older bungalows and ranches often have low-pitched roofs with wide eaves, which means ventilation and flashing details matter more than on a steep new build. Newer master-planned homes in Johnson Ranch and Stoneridge sit on clay and hardpan, so proper drainage and gutter sizing are critical during winter atmospheric-river storms. Add in intense UV, 100-degree summers, and wildfire embers drifting in from the foothills, and you need a roof that reflects heat and resists wind uplift. Our team has worked on everything from historic downtown cottages to custom ranchettes in Granite Bay and Loomis, and we know how to handle tight lot access, HOA design review, and the permit process for each jurisdiction.

We have served Roseville and the surrounding areas for years, and we understand the local building stock. Whether it is a 1920s bungalow near Royer Park or a 2010s two-story in Highland Reserve, we bring the same attention to detail and respect for your property.

Our services in Roseville

How a Job Works in Roseville

Step 1: Call us at (279) 529-5726 or request a free on-site assessment. We will inspect your roof, discuss your options, and provide a written estimate. We also offer free inspections for storm damage and real estate transactions.

Step 2: Once you approve the estimate, we schedule the work and handle the permit process with the City of Roseville. For HOA communities like Sun City Roseville or Woodcreek Oaks, we coordinate color and profile approvals before ordering materials. Our crews are experienced with tight lot access and difficult grade, and we protect your landscaping and driveway throughout the project.

Step 3: After installation, we clean the site thoroughly, walk you through the finished roof, and make sure you are satisfied. We leave your property clean and your roof ready for decades of Roseville weather.

Pricing for metal roofing in Roseville depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, and metal roof replacement at $9. If you are retrofitting over existing shingles, that starts at $7 per square foot, but keep in mind local code limits how many layers you can recover. Repairs start at $450, and screw replacement or re-fastening starts at $750. Coating and painting start at $2.50 per square foot, which is a cost-effective way to extend the life of an existing metal roof. For a precise quote, call us at (279) 529-5726. We offer free estimates and will walk you through every option.

My 1950s ranch in Sierra Gardens has a low-pitch roof and wide eaves. Can you install metal over the existing shingles?
Yes, we can often install metal roofing over your existing shingles, provided the structure is sound and the existing layers are within code limits. For low-pitch roofs, we pay special attention to ventilation and flashing to prevent moisture issues. We will inspect your roof and let you know if a retrofit is a good fit or if a full tear-off is needed.
A winter storm just lifted some panels on my roof in Westpark. How fast can you respond?
We prioritize storm damage calls and can often provide a free inspection within 24 to 48 hours. Call us at (279) 529-5726 to schedule. We will secure the roof, document the damage for your insurance claim, and provide a repair estimate. We never promise insurance coverage, but we help you with the paperwork.
What is the typical cost to replace a roof on a 2,000-square-foot home in Johnson Ranch?
For a 2,000-square-foot home, a metal roof replacement typically ranges from $18,000 to $30,000, depending on the material (standing seam, stone-coated steel, etc.) and the complexity of the roof. Access, pitch, and the number of penetrations like skylights and chimneys also affect the price. We provide free estimates so you can get an exact figure.
Do I need a permit to replace my roof in Roseville, and how do I get one?
Yes, a roofing permit is generally required for a full replacement or re-roof in Roseville. The City of Roseville website has information about permits and inspections. We handle the permit application and inspections for you, ensuring the work meets local codes. Rules can vary, so we always verify with the city before starting.
My HOA in Woodcreek Oaks requires approval for roof color. Can you help with that?
Absolutely. We are familiar with HOA requirements in Roseville communities and can provide color samples and product specifications for your HOA's design review. We will coordinate with your HOA to get approval before ordering materials, so there are no surprises. We also respect property lines and can provide documentation for any neighbor concerns.
Are you fully insured for roofing work in Roseville?
Yes, we are fully insured with both general liability and workers' compensation coverage. Your property and our crew are protected throughout the project.
How often should I have my metal roof inspected in Roseville?
We recommend an inspection every two to three years, especially after winter storms or if you live near oak trees. Roseville's intense UV and wind can loosen fasteners and degrade sealants over time. A quick inspection can catch small issues before they become leaks. We offer free inspections and can advise on maintenance like coating or screw replacement.
Why choose us?

Trusted professionals in Roseville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Roseville

All your work handled by qualified professionals in Roseville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

222+ Verified Client Reviews in Roseville

⭐⭐⭐⭐⭐ 4.9/5 · 222 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Roseville · Response within 24h · No commitment · ☎ (279) 529-5726

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Roseville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm