Serving the Roseville area  ·  (279) 529-5726  ·  Open Mon-Sun 7am-7pm
📞 (279) 529-5726 Free Quote

Metal Roofing in Rancho Cordova, CA (95742) · Local Professionals

Roseville Metal Roofing · Fast response in Rancho Cordova and the Roseville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
🎯 Get a Free Quote 📞 (279) 529-5726
+222Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Rancho Cordova is where the flat Sacramento Valley starts to tilt up toward the foothills, and the housing shows it: 1950s and 60s ranches with wide eaves off Coloma Road, newer two-story stucco homes in Anatolia and Sunridge, and horse properties with metal barns out toward Rancho Cordova Parkway. The lots are a mix of tight suburban pads and half-acre spreads, and the summer sun hits every one of them hard.

Homeowners in Rancho Cordova (95742) call Roseville Metal Roofing because we know how roofs fail here: UV-baked composition shingles, wind-lifted panels after a delta breeze, and embers that drift in from the foothills during fire season. We are based in Roseville, serve Rancho Cordova and the surrounding area, and we are fully insured with general liability and workers' compensation. If you are near the American River Parkway or out by Mather, we can get a free inspection on the calendar.

Metal Roofing in Rancho Cordova (95742)

Rancho Cordova sits on clay and hardpan with seasonal drainage swales, and that ground movement shows up in roof lines. Older ranches off Folsom Boulevard often have low-pitch composition roofs that have baked through 20 or 30 summers, and the fasteners and flashings are usually the first thing to go. Newer neighborhoods like Anatolia and Sunridge have steeper roofs and tighter lot lines, so panel delivery and staging take planning. Out toward the east, where properties get larger and some have shops or barns, we see more metal roof over shingles retrofits and full standing seam installs on outbuildings. The afternoon delta breeze is real, and it works on panel edges and ridge caps. Wildfire embers are a genuine concern on the foothill side of town, which is why stone-coated steel and standing seam are popular here. We also deal with oak limbs and heavy rain in winter atmospheric-river storms, and that combination can puncture a panel or clog a valley fast.

Our team has worked roofs across Rancho Cordova and the greater Roseville area, from single-story retirement homes to commercial buildings along Sunrise Boulevard. We bring the same approach to a small leak repair and a full replacement: find the actual failure point, explain it plainly, and fix it so it stays fixed.

Our services in Rancho Cordova

How a Job Works in Rancho Cordova

Step 1: You call (279) 529-5726 or request a free estimate, and we schedule an on-site assessment. We walk the roof, check fasteners, seams, flashings, and attic ventilation, and we take photos so you can see what we see. You get a written scope and a clear price before any work starts.

Step 2: Once you approve, we pull the permit with the local building department (requirements vary by jurisdiction, so we verify before scheduling) and coordinate with your HOA if you have one. On tight lots in Anatolia or Sunridge, we stage materials in the driveway or on the street according to city rules, and we protect landscaping and windows. If we are doing a metal roof over shingles retrofit, we confirm the existing layers meet code limits before we start.

Step 3: We clean up daily, magnet-sweep for fasteners and metal shavings, and do a final walkthrough with you. We leave your property clean and show you what was done, including any maintenance items to watch.

Pricing in Rancho Cordova depends on roof size, pitch, access, and condition. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a metal roof over shingles retrofit at $7. Corrugated and ribbed panel roofing starts at $5.50, metal shingle and stone-coated steel at $9, and copper or specialty metal at $20. Repairs start at $450, leak repairs at $450, screw replacement and re-fastening at $750, and flashing, chimney, or skylight repair at $600. Coating and painting starts at $2.50 per square foot, gutters for metal roofs at $9 per linear foot, and snow guards and ice protection at $1,200. Storm and wind damage inspections are free, and commercial and agricultural metal roofing is quoted on a free estimate. The biggest cost factors are square footage, how many layers are already on the roof, access and staging, and whether there is active damage. Call (279) 529-5726 for a free estimate that fits your actual roof.

My 1960s ranch off Coloma Road has two layers of shingles. Can you still do a metal roof over shingles retrofit?
Maybe. Code limits how many existing layers can stay, and two layers is often the ceiling before a full tear-off is required. We inspect the decking and layers first, then tell you whether a retrofit is allowed or whether replacement is the safer call. We verify the current rule with the local building department before scheduling.
A windstorm peeled back panels on my roof near Anatolia. How fast can you respond?
Call (279) 529-5726 and we will schedule a free storm and wind damage inspection as soon as possible. We document the damage with photos, make temporary repairs if needed to stop water intrusion, and give you a written repair or replacement estimate. If you are filing an insurance claim, we provide the documentation, though coverage decisions are up to your insurer.
What does a typical metal roof repair cost in Rancho Cordova?
Repairs start at $450, and leak repairs also start at $450. Screw replacement and re-fastening starts at $750, and flashing, chimney, or skylight repair starts at $600. The final price depends on roof access, how many fasteners or seams are involved, and whether there is hidden damage. We give you a firm number after the free inspection.
Do I need a permit for a metal roof in Rancho Cordova, and does the city have design rules?
A roofing permit is commonly required for a full replacement or re-roof, and thresholds, fees, and inspection requirements vary by jurisdiction. We name the local building department and verify the current rules before we pull permits. Historic districts and HOAs can also restrict panel profile and color, so we check those early. We handle the permit paperwork as part of the job.
My HOA in Sunridge wants approval before I change my roof. Can you help with that?
Yes. We provide product specs, color samples, and panel profiles you can submit to your HOA, and we coordinate the approval timeline so it does not hold up the work. If there is a property-line question with a neighbor, we keep staging and drainage on your side of the line and follow city setback rules.
Are you insured for work at my Rancho Cordova property?
Yes. We are fully insured with general liability and workers' compensation coverage.
What maintenance should I do on a metal roof in Rancho Cordova before fire season?
Clear oak limbs and dry debris from the roof and gutters, especially in valleys and behind chimneys, and check that fasteners and seam edges are tight after winter winds. Have us inspect flashing and fasteners once a year. In this climate, UV and wind do more damage than rain, so a spring check before the 100-degree days and a fall check before the atmospheric-river storms go a long way.

Nearby service areas

📍 Roseville 95678📍 Rocklin 95677📍 Loomis 95650📍 Granite Bay 95746
Why choose us?

Trusted professionals in Roseville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Roseville

All your work handled by qualified professionals in Roseville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

222+ Verified Client Reviews in Roseville

⭐⭐⭐⭐⭐ 4.9/5 · 222 verified Google reviews

Amanda K.
⭐⭐⭐⭐⭐
AK
Amanda K.
Loomis

“We had an old metal barn out on our rural property that needed to come down, and honestly I figured it would be a nightmare. The Roseville Metal Roofing crew pulled the corrugated panels, hauled off the steel, and left the site cleaner than they found it. Took them two days for the whole structure. Grateful doesn't cover it.”

Commercial & Agricultural Metal Roofing
Jennifer M.
⭐⭐⭐⭐⭐
JM
Jennifer M.
Granite Bay

“The copper awning over our front entry had gone green and streaky and I was worried it was ruined. They cleaned it up, re-flashed the whole thing, and it looks better than the day we bought the house. Small job but they treated it like it mattered.”

Copper & Specialty Metal Roofing
Robert M.
⭐⭐⭐⭐
RM
Robert M.
Rocklin

“Our barn roof was rusted through in spots and I figured we'd have to tear the whole thing off. Instead they did a metal roof replacement with new ribbed panels and re-fastened everything along the eaves. Whole thing took three days with a four-man crew. It's solid again and I can finally stop worrying about the hay getting soaked.”

Metal Roof Replacement
Tom D.
⭐⭐⭐⭐⭐
TD
Tom D.
Roseville

“We went with standing seam on our house after years of shingle headaches. The crew of five knocked out the whole 2,400 square foot roof in under a week, and the dark bronze finish looks incredible. Neighbors have already asked for their number.”

Standing Seam Metal Roofing
Emily C.
⭐⭐⭐⭐⭐
EC
Emily C.
Citrus Heights

“Had a leak near a vent pipe on our metal roof that two other guys couldn't figure out. Roseville Metal Roofing found it in about twenty minutes, resealed the flashing, and replaced a few stripped screws while they were up there. No more drip in the hallway ceiling. Relieved is an understatement.”

Metal Roof Repair
Kevin R.
⭐⭐⭐⭐⭐
KR
Kevin R.
Orangevale

“We needed gutters that actually worked with our metal roof instead of the mismatched setup the previous owner left behind. They installed a proper seamless system along the back of the house and the dry landscaping in our yard finally stopped getting hammered every time it rains. Clean, quick, no mess left behind.”

Gutters for Metal Roofs
Lisa H.
⭐⭐⭐⭐
LH
Lisa H.
Fair Oaks

“Didn't want to deal with a full tear-off so we asked about a retrofit. They laid the new metal panels right over our old shingles on the 1,800 square foot ranch house and finished in four days. Saved us thousands and the house has been noticeably cooler this summer. Only gripe is the scheduling took a little longer than they first quoted.”

Metal Roof Over Shingles (Retrofit)
Chris A.
⭐⭐⭐⭐⭐
CA
Chris A.
Folsom

“We wanted the look of tile without the weight and cracking, so they set us up with metal shingles in a terracotta color. Honestly from the street you can't tell the difference, and the whole roof went on in about a week. Thrilled with how it turned out.”

Metal Shingle Roofing
Free Quote

Get Your Free Quote

Metal Roofing in Roseville · Response within 24h · No commitment · ☎ (279) 529-5726

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Roseville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm