Serving the Roseville area  ·  (279) 529-5726  ·  Open Mon-Sun 7am-7pm
📞 (279) 529-5726 Free Quote

Metal Roofing in Orangevale, CA (95662) · Local Professionals

Roseville Metal Roofing · Fast response in Orangevale and the Roseville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+222Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Orangevale still feels like the country even though it's right next to Roseville. Lots of older ranches, acreage properties, and homes on big shady lots along Hazel Avenue and near the American River Parkway. If your roof is showing its age, we can help.

We're Roseville Metal Roofing, and we serve Orangevale (95662) and the surrounding area. Whether you're in a 1950s ranch house off Greenback Lane or a newer place near Pershing Avenue, our team knows the local housing stock and the weather that beats up roofs here. Call us at (279) 529-5726 for a free estimate.

Metal Roofing in Orangevale (95662)

Orangevale is a mix of older ranches, custom homes on acreage, and some newer subdivisions. Many properties have large lots with mature oaks and pines, which means falling limbs and debris are a real concern. The soil here is often clay and hardpan, so drainage matters. We see a lot of low-pitch roofs on older homes that are good candidates for metal roof over shingles. And because many homes are on wells and septic, we're careful about runoff and site access. Tight driveways and gates are common, so we plan material delivery and staging accordingly.

Our team has worked on everything from small ranch repairs to full replacements on larger acreage properties. We understand the local building department requirements and can help you navigate permits if needed. We're fully insured with general liability and workers' compensation, so you're protected.

Our services in Orangevale

How a Job Works in Orangevale

Step 1: We start with a free on-site assessment. We'll look at your roof, attic, and drainage, and talk through options like repair, replacement, or a retrofit over existing shingles. We'll give you a written estimate and answer any questions.

Step 2: Once you approve, we schedule the work. In Orangevale, we often deal with tight access for equipment, so we'll plan accordingly. If your home is in an HOA or historic district, we can help with design review. We pull permits as required by the local building department and keep you informed on timing.

Step 3: After installation, we clean up thoroughly, haul away old materials, and do a final walkthrough with you. We make sure you're happy with the work and that your property is left clean.

Pricing for metal roofing in Orangevale depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, replacement at $9, and a retrofit over shingles at $7. Repairs start at $450, and screw replacement at $750. For a typical ranch home, a full replacement might range from $15,000 to $30,000, but we'll give you an exact quote after inspecting your property. Call (279) 529-5726 for a free estimate.

My Orangevale ranch has a low-pitch roof and lots of oak trees. What's the best metal roofing option?
For low-pitch roofs, standing seam or corrugated panels work well because they shed water and debris. With oak trees, we recommend a finish that resists staining and a design that minimizes places for leaves to collect. We can assess your roof and suggest the right profile.
A storm just blew through Orangevale and lifted some panels on my roof. Can you help quickly?
Yes, we handle storm and wind damage repairs. We offer free inspections and can tarp or secure your roof to prevent further damage. Call us at (279) 529-5726 to schedule a prompt visit.
What does a metal roof replacement cost for a typical Orangevale home?
Most replacements run between $9 and $14 per square foot installed, depending on material and roof complexity. A 2,000 sq ft roof might cost $18,000 to $28,000. We provide detailed estimates after a free inspection.
Do I need a permit for a metal roof in Orangevale?
Yes, a permit is typically required for a full replacement or re-roof. Requirements vary, so we always check with the local building department and handle the paperwork for you.
My HOA has design rules. Can you help with approval for a metal roof?
We can provide product specifications and color samples to submit to your HOA. We're familiar with common HOA requirements and can coordinate as needed. Also, be mindful of property lines; we can help ensure your installation complies with setbacks.
Are you fully insured for roofing work in Orangevale?
Yes, we carry general liability and workers' compensation insurance. We're happy to provide proof of insurance upon request.
What maintenance does a metal roof need in Orangevale's climate?
Metal roofs are low-maintenance, but we recommend annual inspections, especially after winter storms. Check for loose fasteners, debris buildup in valleys, and any signs of wear. We offer maintenance plans and inspections.
Why choose us?

Trusted professionals in Roseville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Roseville

All your work handled by qualified professionals in Roseville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

222+ Verified Client Reviews in Roseville

⭐⭐⭐⭐⭐ 4.9/5 · 222 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Roseville · Response within 24h · No commitment · ☎ (279) 529-5726

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Roseville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm